Steele Diamond Band Saws Allow The Operator Great Flexibility To
Cut A Variety Of Different Shapes and Sizes Of Work Pieces.
A Series IV Model 4240 Saw Is Ready To Cut A Thin Slice Of Quartz Glass. 
A Series II Model 3618 Saw Cutting A Slice Of 150 mm. Square Quartz Glass. 
A Series II Model 3618 Saw Holds A 2 Meter Long By 300 mm. Dia. Piece Of Quartz Glass. A Setup To Hold One Type Of Work Piece Can Quickly Be Changed To Hold A Different Shape Or Type of Material
. 
The Motorized Upper Guide Arm Holds The Upper Blade Guide Block In Place Just Over The Top Of The Work Piece. The Guide Arm Can Be Raised Or Lowered To Accept Different Size Work Pieces By A Push-Button Control Located On The Operator Panel. 
The Upper And Lower Guide Block Assemblies Are Interchangeable, And Provide The Support Needed To Allow The Diamond Blade To Cut Smoothly, and
Accurately Through The Work Piece.
The Spring Loaded Carbide Guides Are easy To Adjust, And Easy To Replace When Worn Out. 
The Hydraulic Tension Device Keeps The Diamond Band Saw Blade Tensioned Properly For Accurate Cuts Through Even The Toughest Materials. 
Our Diamond Plated Band Saw Blade Is Produced With A Very Durable Stainless Steel Backing. A Standard Blade Is 1-1/2” (38.1 mm) Width, By .040” (1.00 mm) Gage, By .075” (1.9 mm) Kerf, By 35/40 Grit, And Is Recommended For General Purpose Cutting Of Fused Quartz Glass, And Similar Materials. Blades Are Available In Different Widths And Grits For Different Applications. A Blade Can Last From 80 To 360 Hours Or Longer, And Can Be Changed As Needed In 10 Minutes.
All Steele Series III Diamond Band Saws Include A Fanuc Series “O” CNC Control System. The Main AC Spindle/Blade Drive Motor, And X & Z Axis AC Servo Feed Motors Are Also Supplied By Fanuc. Fanuc Service Is Available World Wide, And A Two Year Fanuc System Warranty Is Currently Included With Each Machine 
Every Fanuc System Can Be Programmed In Inch Or Metric Mode. Precision Tolerances Can Be Achieved By Programming A Minimum Incremental Input Of .0001” Inch Or .001 mm. The Machine Can Operate On Any 3 Phase Input Voltage Of 200 Volts Or More, And Either 50 Or 60 Hertz. The Multi Language Display Can be Set For English, French, Japanese, German, Chinese, Korean, Italian, Or Spanish.